Skip to content
FOR THE EVERYDAY RUNNER.Search
Home/Gear
Gear

Check your running shoes for wear before you count the miles

Mileage is a rough guide to when running shoes are done. Check the midsole, the outsole and the upper first, then use miles as a backup rule of thumb.

3 MIN READ
Hands tying the laces of a running shoe on a path covered in yellow autumn leaves

The number on your running log says the shoes have 250 miles. They look fine, so you keep going. A friend with the same pair retired theirs at 200 because the cushioning felt flat. Mileage is a rough guide, and your own shoes can tell you more if you look at them.

How many miles do running shoes last?

A common rule of thumb says running shoes last roughly 300 to 500 miles, or about 500 to 800 kilometers. The range is wide because shoes, runners and surfaces differ. A heavier runner or a runner on rough roads may wear a pair out sooner than a lighter runner on a treadmill.

Treat the range as a prompt to start checking, not a date to throw the shoes away.

What to check on the midsole

The midsole is the foam layer that cushions each step, and its wear is the hardest to see. Look at the side of the shoe for deep wrinkles in the foam. Press your thumb into the midsole and compare how it feels with a newer pair.

If the foam looks creased and feels flat or dead, the cushioning has probably declined even if the tread looks fine.

What to check on the outsole

The outsole is the rubber on the bottom, and it shows where you land. Look for smooth patches where the pattern has worn away. Uneven wear on one edge may also hint at how your foot lands, which can affect comfort.

Exposed foam through the rubber is a sign the shoe is done. Running on a worn outsole can reduce grip on wet roads.

What to check on the upper and heel

The upper holds your foot, so worn fabric can change how the shoe fits. Check the heel counter by pinching the back of the shoe. If it has collapsed or leans to one side, the shoe no longer holds your heel steady.

Look for holes near the toes and for the inner lining rubbing through at the heel. These small failures can cause blisters.

Listen to your body as well

New aches in the feet, shins or knees that appear without a change in training are worth noticing. If your shoes are old, they may be one cause, though not the only one. Compare the feel of your old pair against a newer pair on a short run.

See a professional if pain persists. Shoes are a possible factor, but they are rarely the whole story.

Track the miles with a simple log

A basic running log makes mileage tracking easy. Add the shoe you wore to each entry, and you will see the total per pair within seconds. The log from keeping a simple run log with date, distance, time and feel needs only one extra column.

Rotating two pairs can also extend the life of each one, since the foam gets time to recover between runs.

Keep easy runs easy in worn shoes

As shoes wear down, impact can feel harder, so protect yourself by keeping your effort controlled. Use the talk test to keep easy runs easy, and consider running by time rather than distance in your first month if you are new. A planned cutback week also gives tired legs and tired shoes a break.

FAQ

How do I know my running shoes are worn out?
Look for creased and flat midsole foam, bald patches on the outsole and a heel that leans. New aches without a training change can be another sign.

Is 500 miles a hard limit?
No. It is a rule of thumb, and some pairs wear out sooner or later depending on the runner and the surface.

Should I replace both shoes if only one looks worn?
That is up to you. Retiring the pair together keeps both shoes at the same stage of wear.